TANGEDCO Assistant Engineer Mock Test, Syllabus & Pattern
Prepare online for the TANGEDCO Assistant Engineer Recruitment Exam. Get access to online mock tests, practice papers, full syllabus, and pattern details.
Hired under TANGEDCO for the post of AE.
Recruitment Highlights
- Total Vacancies: 600
- Applicants Volume: 31,764
- Pay Scale / Salary: 39800 - 126500
- Eligibility Criteria: BE/B.Tech
- Last Date to Apply: 2020-03-15
Detailed Exam Syllabus & Criteria
Annual TANGEDCO AE Salary 2023
Once the candidate has passed the selection process, they will be appointed at a variable pay scale of the range Rs.39,800-12,6500/-, for three months. The candidate will, therefore, be placed at Level One of the pay matrix. The TANGEDCO AE salary package consists of Dearness Allowance (DA), Rent Control Allowance, Health Insurance package, and many more benefits. Thus, the annual package for a TANGEDCO AE will be around Rs. 4,77,600-1,51,8000.
Start your preparation with TANGEDCO AE EC free mock test and get detailed solutions of all questions.
TANGEDCO AE Salary 2023: In-hand
The TANGEDCO AE salary is in the range- Rs.39800-126500/-, which is the Basic Pay. After the 7th pay commission, for employees who come under Level 1 of Officer Pay Matrix, DA or Dearness Allowance is at nine percent of Basic Pay, which comes down to Rs.3582. The HRA or House Rent Allowance varies from location to location and can be anywhere between Rs.6200-Rs.2800. Other allowances like medical or thermal are also dependent on location. The deduction will be around 10 percent, and the major salary will come down to Rs.40000 (approximately).
TANGEDCO AE Exam Pattern 2022: Know Marking Scheme for Written Test
102.9k+ Students Enrolled
Get started for free! Download as PDF
TANGEDCO AE 2022 Exam Pattern
Candidates who are planning to appear for the TANGEDCO ae examination need to start preparing for the exam. Before starting your preparation, it is important to put all your efforts in the right direction. For this, you should know the TANGEDCO AE exam pattern. It will be the best guideline to make the strategy for the exam.
| TANGEDCO Assistant Engineer ME <br> Free Mock Test <br> TANGEDCO conducts a written examination that will be of objective type. Each question will have 4 options from which the candidate will have to choose the correct answer. The commission conducts the exam in English as well as Tamil. The total time for the examination will be 120 minutes. A total of 100 questions will be asked in the examination. The question paper will have three parts. Part 1 consists of questions worth 20 marks, and Part 2 consists of questions worth 20 marks. The last sections comprise questions with a weightage of 60 marks. Below is a table explaining the TANGEDCO AE Exam Pattern. <br> See the list of TANGEDCO AE Books to ace your exams | Subject | No. of Questions | Marks | Marks for each correct answer | Mark deduction for the wrong answer |
| --- | --- | --- | --- | --- | --- |
| Time Duration | Total Marks | Part 1 <br> Engineering Mathematics <br> (Common for all candidates) | 20 | 20 | 1 |
| 1/3 | 2 hours | 100 | Part 2 <br> Basic Engineering and Sciences <br> (Common for all candidates) | 20 | 20 |
| 1 | 1/3 | Part 3 <br> Stream and subject-oriented | 60 | 60 | 1 |
| 1/3 | Subject | No. of Questions | Marks | Marks for each correct answer | |
| Mark deduction for the wrong answer | Time Duration | Total Marks | Part 1 <br> Engineering Mathematics <br> (Common for all candidates) | 20 | 20 |
| 1 | 1/3 | 2 hours | 100 | Part 2 <br> Basic Engineering and Sciences <br> (Common for all candidates) | 20 |
| 20 | 1 | 1/3 | Part 3 <br> Stream and subject-oriented | 60 | 60 |
| 1 | 1/3 | Subject | No. of Questions | Marks | |
| Marks for each correct answer | Mark deduction for the wrong answer | Time Duration | Total Marks | Part 1 <br> Engineering Mathematics <br> (Common for all candidates) | 20 |
| 20 | 1 | 1/3 | 2 hours | 100 | |
| Part 2 <br> Basic Engineering and Sciences <br> (Common for all candidates) | 20 | 20 | 1 | 1/3 | |
| Part 3 <br> Stream and subject-oriented | 60 | 60 | 1 | 1/3 | |
| Subject | No. of Questions | Marks | Marks for each correct answer | Mark deduction for the wrong answer | |
| Time Duration | Total Marks | Part 1 <br> Engineering Mathematics <br> (Common for all candidates) | 20 | 20 | 1 |
| 1/3 | 2 hours | 100 | Part 2 <br> Basic Engineering and Sciences <br> (Common for all candidates) | 20 | 20 |
| 1 | 1/3 | Part 3 <br> Stream and subject-oriented | 60 | 60 | 1 |
| 1/3 | | | | | |
Paper I - Engineering Mathematics: Marks Distribution
Below is the syllabus of Part-1 of the TANGEDCO AE exam pattern. This exam is common for all candidates. This section focuses on the mathematical abilities of the candidate. A total of 20 questions come from the below topics.
- Determinants and Matrices
- Calculus and Differential Equations
- Vector Calculus
- Functions of Complex Variables and Complex Integration
- Transforms
- Numerical Methods
Take the TANGEDCO Assistant Engineer EC free mock test to upscale your exam preparation and beat the competition.
Paper II - Basic Engineering & Sciences: Marks Distribution
The Basic Engineering and Science section carry 20 objective type questions from the following subjects:
- Applied Mechanics
- Civil Engineering
- Chemistry
- Computers
- Electrical Engineering
- Material Science
- Mechanical Engineering
- Physics
Stay updated on all the TANGEDCO AE Exam Date
Paper III - Subject/ Stream Oriented: Marks Distribution
This part is specific to the specialization of the candidate. The various options to choose from for the candidate are:
- Electronics and Electrical Engineering
- Mechanical Engineering
- Civil Engineering
- Electronics and Communication Engineering
You can find a total of 60 questions in this section. The candidate needs to choose his subject while filling up the form. Accordingly, the candidate can select the set in the exam. Below are the subjects for each stream-
- Electronics and Electrical Engineering:
- Digital Electronics
- Electrical Circuits and Fields
- Digital Signal Processing
- Power Systems
- Electrical Machines
- Mechanical Engineering:
- Mechanics
- Automotive Engineering
- Heat Transfer
- Thermodynamics
- Production Technology
- Material science and Metallurgy
- Civil Engineering:
- Surveying
- Environmental Engineering
- Transportation Engineering
- Structural Engineering
- Water Resources Engineering
- Soil Mechanics and Foundation Engineering
- Electronics and Communication Engineering:
- Circuit Analysis
- Antennas and Propagations
- Control Systems
- Digital Communication and Digital ELectronics
- Electromagnetic Fluids and Waves
- Microprocessors and Microwave Engineering
- Transmission Lines and Optical Communication
- Signals and systems
You can get the full TANGEDCO AE Syllabus here
TANGEDCO AE 2022 Syllabus Overview
The syllabus for the job of TANGEDCO Assistant Engineer is different for various sections. Below is the TANGEDCO AE syllabus for the exam in brief. Visit the official website of TANGEDCO to know the syllabus in detail.
| Question paper | Mode of Examination |
| --- | --- |
| Syllabus | |
| PAPER I | MCQ Online Examination |
| Engineering Mathematics | |
| PAPER II | MCQ Online Examination |
| Basic Engineering and Science | |
| PAPER III | MCQ Online Examination |
| Concerned Discipline | |
PAPER I: Engineering and Mathematics (Common for all)
- Numerical Methods: Solution of linear systems by direct and iterative methods – Interpolation and approximation – Numerical Differentiation and Integration – Solving Ordinary Differential Equations.
- Applied Probability: Probability and Random variables – Standard Discrete and Continuous distribution – Moments – Moment generating function and their properties. Two-Dimensional Random Variables – Covariance – Correlation and Regression.
Attempt TANGEDCO Assistant Engineer EC free mock test to get the feel of real exam experience.
PAPER II: Basic Engineering and Science (Common for all)
- Physics: Sound – Latices – Ultrasonic flaw detector – X-ray radiography – Interference Fringes – Planck’s quantum theory – Laser and Fibre Optics.
- Computers: Computer organisation – Architecture – Arrays – Pointers – User defined function – C program.
- Chemistry: Adsorption – Chromatography – Chemical kinetics – Electrochemistry – Spectroscopy – Fuels and Combustion.
PAPER III: Subject/ Stream Oriented (Elective)
| Paper III | Subject/ Stream Oriented (Elective) |
| --- | --- |
| Civil Engineering | |
| Structural engineering <br> Mechanics, structural analysis. Building material, concrete structures, steel structures <br> Surveying: Chain survey, Gale's table layout, errors and classifications, electronic surveys | |
| Mechanical Engineering | |
| Mechanics <br> Strength of material and designs: stress, strain, and fundamentals of designs <br> Material Science and metallurgy: composition of alloys, ferrous, non-ferrous metals | |
| Electrical and Electronics Engineering | |
| Electrical circuits and fields, Nodal and mesh analysis, Gauss theorem, Biot-Savart’s and Ampere’s law <br> Electrical Machines: transformer, generator, motors <br> Control systems: feedback, steady-state, Bode plots | |
| Electronics and Communication Engineering | |
| Circuit analysis: electronic devices, electronic circuits, digital electronics, LIC, measurements, and instruments <br> Electromagnetic fields: EM waves and propagation, antennas and microwave engineering <br> Signal and systems: digital system processing. Control systems | |
| Production and Manufacturing | Basic mechanics and elements of design <br> Casting, metal forming and metal joining processes <br> Tool engineering: Machine tool operation, metrology, and inspection |
| Industrial Engineering | Probability, statistics, engineering economy and costing <br> Work system design and ergonomics <br> Operation research: Linear programming, game theory |
| Computer Science and IT Engineering | Applied probability and operations research <br> Discrete mathematical structure: graph theory <br> Computer design: code generation, programming languages |
| Instrumentation Engineering | |
| Measurements: calibration methods, units, voltmeter, and oscilloscope <br> Analog electronics: Zener diode, BJT, MOSFET, integrator, differentiators. Oscillators, signal generators. | |
| Paper III | |
| Subject/ Stream Oriented (Elective) | |
| Civil Engineering | |
| Structural engineering <br> Mechanics, structural analysis. Building material, concrete structures, steel structures <br> Surveying: Chain survey, Gale's table layout, errors and classifications, electronic surveys | |
| Mechanical Engineering | |
| Mechanics <br> Strength of material and designs: stress, strain, and fundamentals of designs <br> Material Science and metallurgy: composition of alloys, ferrous, non-ferrous metals | |
| Electrical and Electronics Engineering | |
| Electrical circuits and fields, Nodal and mesh analysis, Gauss theorem, Biot-Savart’s and Ampere’s law <br> Electrical Machines: transformer, generator, motors <br> Control systems: feedback, steady-state, Bode plots | |
| Electronics and Communication Engineering | |
| Circuit analysis: electronic devices, electronic circuits, digital electronics, LIC, measurements, and instruments <br> Electromagnetic fields: EM waves and propagation, antennas and microwave engineering <br> Signal and systems: digital system processing. Control systems | |
| Production and Manufacturing | Basic mechanics and elements of design <br> Casting, metal forming and metal joining processes <br> Tool engineering: Machine tool operation, metrology, and inspection |
| Industrial Engineering | Probability, statistics, engineering economy and costing <br> Work system design and ergonomics <br> Operation research: Linear programming, game theory |
| Computer Science and IT Engineering | Applied probability and operations research <br> Discrete mathematical structure: graph theory <br> Computer design: code generation, programming languages |
| Instrumentation Engineering | |
| Measurements: calibration methods, units, voltmeter, and oscilloscope <br> Analog electronics: Zener diode, BJT, MOSFET, integrator, differentiators. Oscillators, signal generators. | |
| Paper III | |
| Subject/ Stream Oriented (Elective) | |
| Civil Engineering | |
| Structural engineering <br> Mechanics, structural analysis. Building material, concrete structures, steel structures <br> Surveying: Chain survey, Gale's table layout, errors and classifications, electronic surveys | |
| Mechanical Engineering | |
| Mechanics <br> Strength of material and designs: stress, strain, and fundamentals of designs <br> Material Science and metallurgy: composition of alloys, ferrous, non-ferrous metals | |
| Electrical and Electronics Engineering | |
| Electrical circuits and fields, Nodal and mesh analysis, Gauss theorem, Biot-Savart’s and Ampere’s law <br> Electrical Machines: transformer, generator, motors <br> Control systems: feedback, steady-state, Bode plots | |
| Electronics and Communication Engineering | |
| Circuit analysis: electronic devices, electronic circuits, digital electronics, LIC, measurements, and instruments <br> Electromagnetic fields: EM waves and propagation, antennas and microwave engineering <br> Signal and systems: digital system processing. Control systems | |
| Production and Manufacturing | Basic mechanics and elements of design <br> Casting, metal forming and metal joining processes <br> Tool engineering: Machine tool operation, metrology, and inspection |
| Industrial Engineering | Probability, statistics, engineering economy and costing <br> Work system design and ergonomics <br> Operation research: Linear programming, game theory |
| Computer Science and IT Engineering | Applied probability and operations research <br> Discrete mathematical structure: graph theory <br> Computer design: code generation, programming languages |
| Instrumentation Engineering | |
| Measurements: calibration methods, units, voltmeter, and oscilloscope <br> Analog electronics: Zener diode, BJT, MOSFET, integrator, differentiators. Oscillators, signal generators. | |
| Paper III | |
| Subject/ Stream Oriented (Elective) | |
| Civil Engineering | |
| Structural engineering <br> Mechanics, structural analysis. Building material, concrete structures, steel structures <br> Surveying: Chain survey, Gale's table layout, errors and classifications, electronic surveys | |
| Mechanical Engineering | |
| Mechanics <br> Strength of material and designs: stress, strain, and fundamentals of designs <br> Material Science and metallurgy: composition of alloys, ferrous, non-ferrous metals | |
| Electrical and Electronics Engineering | |
| Electrical circuits and fields, Nodal and mesh analysis, Gauss theorem, Biot-Savart’s and Ampere’s law <br> Electrical Machines: transformer, generator, motors <br> Control systems: feedback, steady-state, Bode plots | |
| Electronics and Communication Engineering | |
| Circuit analysis: electronic devices, electronic circuits, digital electronics, LIC, measurements, and instruments <br> Electromagnetic fields: EM waves and propagation, antennas and microwave engineering <br> Signal and systems: digital system processing. Control systems | |
| Production and Manufacturing | Basic mechanics and elements of design <br> Casting, metal forming and metal joining processes <br> Tool engineering: Machine tool operation, metrology, and inspection |
| Industrial Engineering | Probability, statistics, engineering economy and costing <br> Work system design and ergonomics <br> Operation research: Linear programming, game theory |
| Computer Science and IT Engineering | Applied probability and operations research <br> Discrete mathematical structure: graph theory <br> Computer design: code generation, programming languages |
| Instrumentation Engineering | |
| Measurements: calibration methods, units, voltmeter, and oscilloscope <br> Analog electronics: Zener diode, BJT, MOSFET, integrator, differentiators. Oscillators, signal generators. | |
| Paper III | |
| Subject/ Stream Oriented (Elective) | |
| Civil Engineering | |
| Structural engineering <br> Mechanics, structural analysis. Building material, concrete structures, steel structures <br> Surveying: Chain survey, Gale's table layout, errors and classifications, electronic surveys | |
| Mechanical Engineering | |
| Mechanics <br> Strength of material and designs: stress, strain, and fundamentals of designs <br> Material Science and metallurgy: composition of alloys, ferrous, non-ferrous metals | |
| Electrical and Electronics Engineering | |
| Electrical circuits and fields, Nodal and mesh analysis, Gauss theorem, Biot-Savart’s and Ampere’s law <br> Electrical Machines: transformer, generator, motors <br> Control systems: feedback, steady-state, Bode plots | |
| Electronics and Communication Engineering | |
| Circuit analysis: electronic devices, electronic circuits, digital electronics, LIC, measurements, and instruments <br> Electromagnetic fields: EM waves and propagation, antennas and microwave engineering <br> Signal and systems: digital system processing. Control systems | |
| Production and Manufacturing | Basic mechanics and elements of design <br> Casting, metal forming and metal joining processes <br> Tool engineering: Machine tool operation, metrology, and inspection |
| Industrial Engineering | Probability, statistics, engineering economy and costing <br> Work system design and ergonomics <br> Operation research: Linear programming, game theory |
| Computer Science and IT Engineering | Applied probability and operations research <br> Discrete mathematical structure: graph theory <br> Computer design: code generation, programming languages |
| Instrumentation Engineering | |
| Measurements: calibration methods, units, voltmeter, and oscilloscope <br> Analog electronics: Zener diode, BJT, MOSFET, integrator, differentiators. Oscillators, signal generators. | |
| Paper III | |
| Subject/ Stream Oriented (Elective) | |
| Civil Engineering | |
| Structural engineering <br> Mechanics, structural analysis. Building material, concrete structures, steel structures <br> Surveying: Chain survey, Gale's table layout, errors and classifications, electronic surveys | |
| Mechanical Engineering | |
| Mechanics <br> Strength of material and designs: stress, strain, and fundamentals of designs <br> Material Science and metallurgy: composition of alloys, ferrous, non-ferrous metals | |
| Electrical and Electronics Engineering | |
| Electrical circuits and fields, Nodal and mesh analysis, Gauss theorem, Biot-Savart’s and Ampere’s law <br> Electrical Machines: transformer, generator, motors <br> Control systems: feedback, steady-state, Bode plots | |
| Electronics and Communication Engineering | |
| Circuit analysis: electronic devices, electronic circuits, digital electronics, LIC, measurements, and instruments <br> Electromagnetic fields: EM waves and propagation, antennas and microwave engineering <br> Signal and systems: digital system processing. Control systems | |
| Production and Manufacturing | Basic mechanics and elements of design <br> Casting, metal forming and metal joining processes <br> Tool engineering: Machine tool operation, metrology, and inspection |
| Industrial Engineering | Probability, statistics, engineering economy and costing <br> Work system design and ergonomics <br> Operation research: Linear programming, game theory |
| Computer Science and IT Engineering | Applied probability and operations research <br> Discrete mathematical structure: graph theory <br> Computer design: code generation, programming languages |
| Instrumentation Engineering | |
| Measurements: calibration methods, units, voltmeter, and oscilloscope <br> Analog electronics: Zener diode, BJT, MOSFET, integrator, differentiators. Oscillators, signal generators. | |
| Paper III | |
| Subject/ Stream Oriented (Elective) | |
| Civil Engineering | |
| Structural engineering <br> Mechanics, structural analysis. Building material, concrete structures, steel structures <br> Surveying: Chain survey, Gale's table layout, errors and classifications, electronic surveys | |
| Mechanical Engineering | |
| Mechanics <br> Strength of material and designs: stress, strain, and fundamentals of designs <br> Material Science and metallurgy: composition of alloys, ferrous, non-ferrous metals | |
| Electrical and Electronics Engineering | |
| Electrical circuits and fields, Nodal and mesh analysis, Gauss theorem, Biot-Savart’s and Ampere’s law <br> Electrical Machines: transformer, generator, motors <br> Control systems: feedback, steady-state, Bode plots | |
| Electronics and Communication Engineering | |
| Circuit analysis: electronic devices, electronic circuits, digital electronics, LIC, measurements, and instruments <br> Electromagnetic fields: EM waves and propagation, antennas and microwave engineering <br> Signal and systems: digital system processing. Control systems | |
| Production and Manufacturing | Basic mechanics and elements of design <br> Casting, metal forming and metal joining processes <br> Tool engineering: Machine tool operation, metrology, and inspection |
| Industrial Engineering | Probability, statistics, engineering economy and costing <br> Work system design and ergonomics <br> Operation research: Linear programming, game theory |
| Computer Science and IT Engineering | Applied probability and operations research <br> Discrete mathematical structure: graph theory <br> Computer design: code generation, programming languages |
| Instrumentation Engineering | |
| Measurements: calibration methods, units, voltmeter, and oscilloscope <br> Analog electronics: Zener diode, BJT, MOSFET, integrator, differentiators. Oscillators, signal generators. | |
| Paper III | |
| Subject/ Stream Oriented (Elective) | |
| Civil Engineering | |
| Structural engineering <br> Mechanics, structural analysis. Building material, concrete structures, steel structures <br> Surveying: Chain survey, Gale's table layout, errors and classifications, electronic surveys | |
| Mechanical Engineering | |
| Mechanics <br> Strength of material and designs: stress, strain, and fundamentals of designs <br> Material Science and metallurgy: composition of alloys, ferrous, non-ferrous metals | |
| Electrical and Electronics Engineering | |
| Electrical circuits and fields, Nodal and mesh analysis, Gauss theorem, Biot-Savart’s and Ampere’s law <br> Electrical Machines: transformer, generator, motors <br> Control systems: feedback, steady-state, Bode plots | |
| Electronics and Communication Engineering | |
| Circuit analysis: electronic devices, electronic circuits, digital electronics, LIC, measurements, and instruments <br> Electromagnetic fields: EM waves and propagation, antennas and microwave engineering <br> Signal and systems: digital system processing. Control systems | |
| Production and Manufacturing | Basic mechanics and elements of design <br> Casting, metal forming and metal joining processes <br> Tool engineering: Machine tool operation, metrology, and inspection |
| Industrial Engineering | Probability, statistics, engineering economy and costing <br> Work system design and ergonomics <br> Operation research: Linear programming, game theory |
| Computer Science and IT Engineering | Applied probability and operations research <br> Discrete mathematical structure: graph theory <br> Computer design: code generation, programming languages |
| Instrumentation Engineering | |
| Measurements: calibration methods, units, voltmeter, and oscilloscope <br> Analog electronics: Zener diode, BJT, MOSFET, integrator, differentiators. Oscillators, signal generators. | |
| Paper III | |
| Subject/ Stream Oriented (Elective) | |
| Civil Engineering | |
| Structural engineering <br> Mechanics, structural analysis. Building material, concrete structures, steel structures <br> Surveying: Chain survey, Gale's table layout, errors and classifications, electronic surveys | |
| Mechanical Engineering | |
| Mechanics <br> Strength of material and designs: stress, strain, and fundamentals of designs <br> Material Science and metallurgy: composition of alloys, ferrous, non-ferrous metals | |
| Electrical and Electronics Engineering | |
| Electrical circuits and fields, Nodal and mesh analysis, Gauss theorem, Biot-Savart’s and Ampere’s law <br> Electrical Machines: transformer, generator, motors <br> Control systems: feedback, steady-state, Bode plots | |
| Electronics and Communication Engineering | |
| Circuit analysis: electronic devices, electronic circuits, digital electronics, LIC, measurements, and instruments <br> Electromagnetic fields: EM waves and propagation, antennas and microwave engineering <br> Signal and systems: digital system processing. Control systems | |
| Production and Manufacturing | Basic mechanics and elements of design <br> Casting, metal forming and metal joining processes <br> Tool engineering: Machine tool operation, metrology, and inspection |
| Industrial Engineering | Probability, statistics, engineering economy and costing <br> Work system design and ergonomics <br> Operation research: Linear programming, game theory |
| Computer Science and IT Engineering | Applied probability and operations research <br> Discrete mathematical structure: graph theory <br> Computer design: code generation, programming languages |
| Instrumentation Engineering | |
| Measurements: calibration methods, units, voltmeter, and oscilloscope | |
Analog electronics: Zener diode, BJT, MOSFET, integrator, differentiators. Oscillators, signal generators.
Take the TANGEDCO Assistant Engineer CE free mock test to upscale your exam preparation and beat the competition.
We hope that you found this article on the TANGEDCO AE Exam Pattern informative and useful. You can also reach out to us in case of any doubts or queries. Candidates can also start preparing for all types of Government exams and learn more with the help of our Testbook App.
TANGEDCO Assistant Engineer 2022 Syllabus
The TANGEDCO AE exam syllabus for the online exam and all its parts is given in the following table. The best way to cover the syllabus is to read your college textbooks. The TANGEDCO AE syllabus and the questions are based on the degree level, and even the toughest questions are from the topics that the aspirants must have learned during their degree coursework.
PAPER I: Engineering and Mathematics (Common for all)
- Determinants and matrices: Solving system of equations – Rank of the Matrix – Eigenvalues and eigenvectors – Reduction of quadratic form to canonical form.
- Calculus and Differential Equations: Partial derivatives – Jacobians – Taylor’s expansion – Maxima and Minima. Linear ordinary differential equations with constant coefficients – Simultaneous first order linear equations with constant coefficients. Formation of partial differential equation (PDE) – Solution of first order PDE – Solution of linear higher order PDE with constant coefficients.
- Vector Calculus: Double and triple integrations and their applications – Gradient, Divergence, Curl and Laplacian – Green’s, Gauss divergence and Stoke's theorem.
- Functions of Complex Variables and Complex Integration: Analytic functions – Conformal Mapping – Bilinear transformation – Cauchy’s integral theorem and integral formula – Taylor and Laurent Series – Singularities – Residues – Residue theorem and its applications
- Transforms: Laplace Transform – Inverse transforms – Application to solution of linear ordinary differential equations with constant coefficients. Fourier integral theorem – Fourier transform pair – Sine and Cosine transforms. -transform – Inverse Z– transform – Solution of difference equations using Z– transform.
| TANGEDCO Assistant Engineer ME Mock Test <br> - Numerical Methods: Solution of linear system by direct and iterative methods – Interpolation and approximation – Numerical Differentiation and Integration – Solving Ordinary Differential Equations. <br> - Applied Probability: Probability and Random variables – Standard Discrete and Continuous distribution – Moments – Moment generating function and their properties. Two-Dimensional Random Variables – Covariance – Correlation and Regression. |
| --- |
Attempt TANGEDCO Assistant Engineer EC free mock test to get the feel of real exam experience.
PAPER II: Basic Engineering and Science (Common for all)
- Applied Mechanics: Law of Mechanics – Lame’s theorem – Forces, Moments and Couples – Displacement, velocity and Acceleration – Friction – Moment of Inertia.
- Mechanical Engineering: Laws of thermodynamics – Open and closed systems – Equation of state – Heat and Work.
- Physics: Sound – Latices – Ultrasonic flaw detector – X-ray radiography – Interference Fringes – Planck’s quantum theory – Laser and Fibre Optics.
- Material Science: Fracture – Magnetic and Dielectric materials – Conductor and Semiconductor materials – Ceramic and Superconductor materials.
- Civil Engineering: Fluid Statics and Dynamics – Boundary Layer – Pumps and Turbines – Environmental Pollution.
- Electrical Engineering: Ohm’s law – Kirchoff’s law – A.C. circuits – D.C. machines – Transformers – Synchronous machines – Instrumentation.
- Computers: Computer organisation – Architecture – Arrays – Pointers – User defined function – C program.
- Chemistry: Adsorption – Chromatography – Chemical kinetics – Electrochemistry – Spectroscopy – Fuels and Combustion.
Read Other TANGEDCO AE articles below:
TANGEDCO AE Application Process
TANGEDCO AE Exam Date
TANGEDCO AE Result
PAPER III: Subject/ Stream Oriented (Elective)
| Paper III | Subject/ Stream Oriented (Elective) |
| --- | --- |
| Civil Engineering | |
| Structural engineering <br> Mechanics, structural analysis. Building material, concrete structures, steel structures <br> Soil mechanics and foundation engineering: nature and classification of soil, scope, and objective of site investigation <br> Transportation engineering: highway planning, railways, airways, docks and harbour planning. Traffic engineering <br> Water resources engineering: fluid mechanics and hydraulics, hydrology and groundwater, irrigation engineering <br> Environmental engineering: wastewater engineering, water distribution, and sewage disposal, air pollution and control, noise pollution, and its impact. <br> Surveying: Chain survey, Gale's table layout, errors and classifications, electronic surveys | |
| Mechanical Engineering | Mechanics <br> Strength of material and designs: stress, strain, and fundamentals of designs <br> Material Science and metallurgy: composition of alloys, ferrous, non-ferrous metals <br> Thermodynamics: the three laws, working of gas turbines and boilers <br> Heat transfer: exchange of heat and conduction <br> Production technology: foundry technology, metal cutting and joining processes <br> Automotive engines: Theory of engines, supercharging and turbocharging |
| Electrical and Electronics Engineering | |
| Electrical circuits and fields, Nodal and mesh analysis, Gauss theorem, Biot-Savart’s and Ampere’s law <br> Electrical Machines: transformer, generator, motors <br> Power system: electric power generation, insulators, and conductors <br> Control systems: feedback, steady-state, Bode plots <br> Power electronics and drives: MOSFETs, GTO, and other semiconductor devices <br> Digital electronics: Digital logic, microprocessors, and microcontrollers <br> Digital signal processing <br> Computer control and networks <br> Communication engineering: modulation and demodulation, satellites | |
| Electronics and Communication Engineering | |
| Circuit analysis: electronic devices, electronic circuits, digital electronics, LIC, measurements, and instruments <br> Electromagnetic fields: EM waves and propagation, antennas and microwave engineering <br> Communication theory and systems: digital communication, computer connection networks, optical communication <br> Signal and systems: digital system processing. Control systems | |
| Production and Manufacturing | Basic mechanics and elements of design <br> Casting, metal forming and metal joining processes <br> Tool engineering: Machine tool operation, metrology, and inspection <br> Material engineering and computer-aided manufacturing <br> Product and process design: design of jigs and fixtures and press tools <br> Operations research: Linear programming, game theory <br> Operations management: forecasting, cost analysis, costing methods <br> Quality control, reliability, and maintenance. |
| Industrial Engineering | Probability, statistics, engineering economy and costing <br> Work system design and ergonomics <br> Operation research: Linear programming, game theory <br> Operations and supply chain management <br> Quality engineering and management; TQM, TPM, fault diagnosis |
| Computer Science and IT Engineering | Applied probability and operations research <br> Discrete mathematical structure: graph theory <br> Computer design: code generation, programming languages <br> Operating systems and system software <br> Distributed systems and distributed operating systems <br> Programming And data structures <br> Algorithm analysis, and design techniques: dynamic programming and NP-completeness <br> Microprocessors, microcontrollers, computer architecture, and organization <br> Digital signal processing <br> Computer networks <br> DBMS <br> Software engineering methodologies <br> Artificial intelligence <br> Mobile computing <br> Security in computing |
| Instrumentation Engineering | |
| Measurements: calibration methods, units, voltmeter, and oscilloscope | |
Analog electronics: Zener diode, BJT, MOSFET, integrator, differentiators. Oscillators, signal generators
Digital electronics: Boolean functions, ADC and DAC, memory, acquisition systems
Industrial instrumentation and analytical instrumentation: spectroscopy and transducers
Control systems and industrial data communication: DFT, FFT, Laplace, Fourier, PLC, SCADA, IoT.
Take the TANGEDCO Assistant Engineer CE free mock test to upscale your exam preparation and beat the competition.
TANGEDCO Assistant Engineer Exam Pattern 2022
As mentioned above, the online exam is divided into three papers. Each question in the paper carries 1 mark. A wrong answer will result in a deduction of ⅓ marks. The TANGEDCO AE exam pattern for exam is as follows:
| Paper | Subject |
| --- | --- |
| Paper type | |
| Number of Questions | |
| Duration | |
| Total Marks | |
| Paper I | |
| Engineering and Mathematics | |
| MCQ | 20 |
| 2 hours | 100 |
| Paper II | |
| Basic Engineering and Science | |
| MCQ | 20 |
| Paper III | |
| Concerned Discipline | |
| MCQ | 60 |
| Total Questions | 100 |
We hope that the article could provide you all the necessary information related to the TANGEDCO AE Syllabus. For more such articles, subscribe to Testbook by downloading the Testbook App now!
